-
Advantages and Disadvantages of Soft Seal Gate Valve
The structure is compact, the valve has good rigidity, the channel is smooth, and the flow resistance is small. The sealing surface is made of stainless steel and carbide, which has a long service life. It uses PTFE packing to ensure reliable sealing and light and flexible operation.
READ MORE18
2023.09
-
How to choose the valve of the waterworks?
The pipelines are pressure transmission pipelines, and the most used ones are gate valves, globe valves, ball valves, butterfly valves, check valves, soft joints, etc. The coating and internal treatment of each valve must meet the requirements of drinking water sanitation permits.
READ MORE07
2023.09
-
How to choose the valve of central air conditioning (water system) piping system?
In the entire central air-conditioning (water system) pipeline, the valve is naturally an indispensable control component. wesdom valve provides you with a complete set of central air-conditioning (water system) pipeline valve solutions.
READ MORE04
2023.09
-
What is a knife gate valve?
This valve is generally used for opening and closing the circulation of pulp, coal ash, chemical raw materials, sewage, food and other media. The pressure range is generally used within 1.6MPa, the temperature is generally used below 120°C, and special materials can also be used for high temperature.
READ MORE01
2023.09
-
Drainage pipe valve selection guide is here!
Ball valve is evolved from the plug valve, its opening and closing member is a sphere, the use of the sphere around the axis of the valve stem rotated 90 ° to achieve the purpose of opening and closing. Ball valve in the pipeline is mainly used to cut off, distribution and change the direction of media flow, designed as a V-shaped opening of the ball valve also has a good flow regulation function.
READ MORE31
2023.08
-
What is flange expansion butterfly valve?
Flange Expansion Butterfly Valve, is a kind of butterfly valve that the structural length of the flange can be expanded and contracted within a certain range, this kind of valve is convenient for disassembling and assembling, but also can relieve the pipeline stress, and protect the valve and pipeline's normal flow.
READ MORE28
2023.08
-
What is the difference between a globe valve and a gate valve?
The application range of globe valves and gate valves is determined by their characteristics. In the smaller channel, when the requirements of a good shut-off sealing, more use of globe valves; in the steam pipeline and large-diameter water pipeline, as the fluid resistance is generally required to be smaller, the use of gate valves.
READ MORE25
2023.08
-
How to choose butterfly valve?
Butterfly valve, also known as flap valve, is a simple structure of the regulating valve, can be used for low-pressure pipeline media switching control of the butterfly valve is the closing member (valve flap or butterfly plate) for the disc, rotating around the valve axis to achieve the opening and closing of a kind of valve.
READ MORE21
2023.08
-
The difference between a rising stem gate valve and no rising stem gate valve?
The gate valve has a small fluid resistance, applicable pressure, temperature range, etc., and is one of the most commonly used cut-off valves to cut off or connect the medium in the pipeline.
READ MORE18
2023.08
-
Valve installation need to pay attention to the twenty-seven articles!
The importance of safe valves is beyond doubt, and how to correctly install the valve determines whether the valve can be used safely. Different valves, different use of the environment, the valve installation needs to pay attention to different content, the following is the valve installation needs to pay attention to the twenty-seven!
READ MORE15
2023.08
-
Correct selection of valves is vital!
There are many types of valves, and each type of valve has its own advantages and roles. Selecting the incorrect valve may make control of a pipeline project difficult or even impossible, so it is vital to select the right valve.
READ MORE11
2023.08
-
The water hammer hazard is so serious!
Water hammer is called water hammer due to the inertia of the pressurised water flow that produces a water flow shock wave, like a hammer blow, when there is a sudden power failure or when the valve is closed too quickly. The force generated by the back and forth of the water shock wave is sometimes so great that it destroys valves and pumps.
READ MORE07
2023.08
