1. Installation in the pipeline that discharges from the opening should be installed at the lower part of the pipeline.
2. The transmitter is a precision instrument. Avoid strong impact and beating when installing.
3. The control valve and shut-off valve should be installed downstream of the flowmeter, not upstream of the sensor.
4. Connect correctly according to the wiring diagram.
5. The transmitter should be installed in a ventilated, dry, non-corrosive, and cool place. If installed in the open air, a protective cover should be added to avoid sunlight and rain, and to avoid performance degradation or failure of the transmitter.
6. If the pipe drop exceeds 5m, install an exhaust valve downstream of the flowmeter.
